Using a 5volt vtx on an Arkbird
#1
Thread Starter
Join Date: Feb 2010
Location: ThornlieWA, AUSTRALIA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Using a 5volt vtx on an Arkbird
I have plugged my 5 volt vtx into the 5volt tx pins on my Arkbird OSD. My goggles show their picking up the vtx signal but not showing a picture. Wondered if I could continue using the 5volt and ground pins but use the signal
pin from the 12 volt video out plug.
pin from the 12 volt video out plug.