hall's springfield bulldog racer w/plans $3000 obo manor texas, I cannot ship
09-24-2023, 09:26 AM
#1
Thread Starter
hall's springfield bulldog racer w/plans $3000 obo manor texas, I cannot ship
It's been in my way for too long, not quite finished needs fuel tank and some more servo's, flight surface's not glued in place. make a offer!
97 inch span engine = Sachs 4.2 zero time
Dummy prop and full size plans included
97 inch span engine = Sachs 4.2 zero time
Dummy prop and full size plans included
Last edited by donnyman; 09-25-2023 at 05:42 AM. Reason: corrections
The following users liked this post:
Rocketman612 (09-28-2023)
09-24-2023, 05:28 PM
#2
My Feedback: (569)
Beautiful aircraft
1) What is the aircraft covered in...fabric, monokote, ultracote, ???
2) If the covering is fabric what paint was used?
3) What engine is installed?
4) What servos are currently installed on what surfaces?
5) Any idea what the current weight is?
Thx
Bill
1) What is the aircraft covered in...fabric, monokote, ultracote, ???
2) If the covering is fabric what paint was used?
3) What engine is installed?
4) What servos are currently installed on what surfaces?
5) Any idea what the current weight is?
Thx
Bill
09-14-2024, 11:10 AM
#3
Thread Starter
Beautiful aircraft
1) What is the aircraft covered in...fabric, monokote, ultracote, ???
2) If the covering is fabric what paint was used?
3) What engine is installed?
4) What servos are currently installed on what surfaces?
5) Any idea what the current weight is?
Thx
Bill
1) What is the aircraft covered in...fabric, monokote, ultracote, ???
2) If the covering is fabric what paint was used?
3) What engine is installed?
4) What servos are currently installed on what surfaces?
5) Any idea what the current weight is?
Thx
Bill
