HB Dragonfly Swashplate DIY
#1
Senior Member
Thread Starter
Join Date: Jan 2004
Location: Columbia Heights, MN
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
HB Dragonfly Swashplate DIY
Hi All,
I know you can get a machined swash online, but this is just for the DIY'ers.
You know when you've built it yourself, you fly more carefully
I'm just starting out learning CNC machining and drew up this swashplate diagram I thought someone may find useful.
Its just in pencil right now, but hopefully someone more experience can take advantage of it.
It's all in SI metric. :-) or :-(
I'm slowly working on converting this to vector format for easy machining.
You can get the 3mm balls at helihobby.com.
Please let me know if some of my measurements are off.
-Dan
I know you can get a machined swash online, but this is just for the DIY'ers.
You know when you've built it yourself, you fly more carefully
I'm just starting out learning CNC machining and drew up this swashplate diagram I thought someone may find useful.
Its just in pencil right now, but hopefully someone more experience can take advantage of it.
It's all in SI metric. :-) or :-(
I'm slowly working on converting this to vector format for easy machining.
You can get the 3mm balls at helihobby.com.
Please let me know if some of my measurements are off.
-Dan