15 minute rechargeables
03-02-2004, 09:31 PM
#3
Senior Member
Join Date: Aug 2003
Location: Worcester,
MA
Posts: 2,592
Likes: 0
Received 0 Likes
on
0 Posts
RE: 15 minute rechargeables
I would not consider plain untabbed unsolderable cells for your plain alkaline cell holders, because an alkaline cell is 1.5 volts, so 4x1.5 = 6v. But Ni-Cads and NiMh's are 1.2 volts. So 4x1.2 = 4.8 volts for your equipment. So that equals decreased performance. I think getting a preassembled 5cell nicad or nimh pack would be better.
Experienced members, feel free to correct me.
Experienced members, feel free to correct me.
03-03-2004, 06:32 PM
#5
Senior Member
Join Date: Aug 2003
Location: Worcester,
MA
Posts: 2,592
Likes: 0
Received 0 Likes
on
0 Posts
RE: 15 minute rechargeables
uum still there not solderable and you have to take them out every time to recharge them in a special charger, assuming that the batteries are NiMH, if they're nicad, im not sure, PLUS does it only run for 15mins?
03-03-2004, 06:35 PM
#6
Member
Thread Starter
Join Date: Jan 2004
Location: woburn,
MA
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
RE: 15 minute rechargeables
here take a look at this link. http://www.rayovac.com/products/recharge/recharge.shtml this should exsplain things for you better
