Will this servo work with stock radio...?
#1
Junior Member
Thread Starter
Join Date: Feb 2004
Location: Kenner, LA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Will this servo work with stock radio...?
I am looking at getting a [link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&W=000530584&I=LXUZ81&P=K]Hitec HS-5645MG Servo[/link]. It is a digital servo and I am just wondering if this will work with my stock radio and reciever?
#3
My Feedback: (4)
Join Date: Sep 2003
Location: Temecula, CA
Posts: 5,692
Likes: 0
Received 0 Likes
on
0 Posts
RE: Will this servo work with stock radio...?
Yes it will... You MAY also want to upgrade to a 6V Rx niMH pack as well. With that servo, your alkalines won't last as long.
It will work, and work VERY good. I have the Hitec 645 in my Maxx, and the 5645 in my RCX, and they both work very well.
It will work, and work VERY good. I have the Hitec 645 in my Maxx, and the 5645 in my RCX, and they both work very well.
#4
Junior Member
Thread Starter
Join Date: Feb 2004
Location: Kenner, LA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
RE: Will this servo work with stock radio...?
Thanks for the quick respones everyone. I already have a Nimh pack and was surprised how fast my friends cheap futaba servo worked with it and how slow the stock 2055 was.