wingburner

My Feedback: (17)

Does anyone know anything about there planes.They seem a little cheaper money wise.Just wondering about the quality.Don't read anything about them.

Thanks Jack

DaveMiller

Hello,

I saw the after math of a rh wing failure on the big 40% last year and I have seen some posts over the months of cover blowing off wings. Cant say about long term quality. I know they fly nice like most of the others but Im a firm beliver of you get what you pay for and I have been down that road.

Thanks

Dave Miller P.A.

JohnVH

My Feedback: (38)

I believe there is one or two in our imac circuit, I believe the owners like them, they are very nice looking planes

PlaneKrazee

My Feedback: (14)

A fellow club member and friend owns one and he really likes it and flys the hell out of it!

downhumpty

My Feedback: (1)

A man that flies Imac in the Southeast, Jerry Candito owns Two and the are set up exactly alike He really make me want one every time I see him fly them. He flies at the top of unlimited. Nice planes. You can even walk beside them while landing. Never seen them stall on landing....Kent Porter

krayzc-RCU

My Feedback: (31)

every one i have seen flies looks and performs great[8D]

jonkoppisch

My Feedback: (162)

Jason Shulman was wringing the edge out pretty good at Joe Nall. Looked like a great flying plane!!!

Banker

My Feedback: (10)

Dave Miller:

What does P.A. stand for exactly? I've seen your posts with the "P.A." Plane Addict or Physicans Assistant?

aerolou

My Feedback: (3)

I have the 40% extra. Very good quality as far as I'm concerned.
First flight needed 2 beeps of down trim, incidences came set from the factory.
I fly mostly 3D and would say the only limiting factor for the plane would be the thumbs at the transmitter.
Probably have about 50 flights so far and it has been trouble free. [8D]

I did go over the whole plane with an iron to make sure the covering was nailed down really well
also made sure the glue joints looked good.

You should do this with all ARF's.

Lou

PlaneKrazee

My Feedback: (14)

Lou's plane isn't limited[sm=thumbup.gif][sm=thumbup.gif][sm=tongue.gif]

al

Dear Mr. Miller,


You've been spouting that story for over a year now. We have in the past asked you for the persons name who owned the plane.

Obviously you are still mistaken on your "hear say".

We contacted all our customers when you first came out with this fairytail, none of which have every had a problem!!!!!! nor have we had any problems to date.

With our customers permission I will galdy provide you or anyone with there names and if you can find that so called customer Please let us know. I would be more than happy to take care of any problem that exsist with our products.

Al Young
owner
JTEC/RADIOWAVE
845- 361-3660

mAvRiCk-inactive

YEA MAN LOU KICKS SOME BUTT WITH ALL OF HIS PLANES...if his planes survive anyones will ;-)

BTW Lou this is Danb form the indoor fly-in :-)

Peace

Dan

DaveMiller

Mr. Young

I posted what I was told at the field and I indicated specfically that I drove up after it happened and the person indicated it was the 40% Jtec ARF. If you have contacted every customer who has bought the ARF's then you have you must also ask yourself maybe this is not the original owner or third or whatever the case may be. I can't tell you other than what I was told when I asked what happened and I never indicated anything else or spouted as you put it. Since your on a soap box I was at Joe nall and saw a few of your planes flying and even talked to a few folks and they were happy with some issues of glue joints and covering comming off.


So I think instead of alienating a potential customer and yes I was considering a 35% Panzl 330 plane since they are different and I normally don't buy anymore arfs. But you can forget any business from me. Maybe your time is better served listening instead or pounding your chest.

Dave Miller

mAvRiCk-inactive

How about you both chill? Man, no reaon fussing aobut planes. If you can't handle sometihng then don'ttalk about it.

"I posted what I was told at the field and I indicated specfically that I drove up after it happened and the person indicated it was the 40% Jtec ARF"

So did you see the crash or anything?

Maybe the guys did something worng in securing the wing. You may ot always hear hte full story!

Dan

Shortman

My Feedback: (21)

I thought the J TEC Radiowave planes were brand new, not even but a few months old. How did someone fly one about a year ago?

Just wondering...

MAJSteve

My Feedback: (-1)

I had the pleasure of covering one of these aircraft (ARC is guess). The only woodworking I had to do was cut the firewall and support sides to fit the specific engine. All joints were completely tight and the wood was of excellent quality. I never touched it with sandpaper at all. The 3-view and pics I was given of a specific aircraft to copy showed that the rudder was a little offsized, but I cut the covering to match the pictures and it looked fine.

Just wish I could afford one!

GrnBrt

My Feedback: (5)

If all a person has is second hand information then I think the best thing to do is not post at all about a product. I have seen many planes go in and the plane gets the blame when in reality it was something that the pilot did wrong. Let's leave hearsay evidence where it belongs, unsaid!

DaveMiller

GrnBrt,

That is a good thought, but in forums you can never tell who is telling what and you have to judge what you read. The owner of the plane gave a clear answer when asked what happened, not another person. I can only tell you what was seen after it happened as I stated long ago. I have seen many other posts similar to that as well as second hand, third hand etc. So guys use your best judgement when reading in here ar any other site to made educated decisions based on what you believe is fact.

Regards


Dave Miller P.A.

JBanks523

My Feedback: (17)

I can attest to Lou's flying great... I have a couple of good vids of it... if my bandwidth was destroyed from hosting XFC vids... I would post it. Aww hell, Im uploading it now, Ill host it anyway, it will be up in 15 mins or so.

Banker

My Feedback: (10)

Dave Miller:

Once again, what does P.A. stand for exactly? I've seen your posts with the "P.A." Plane Addict or Physicans Assistant?

jonkoppisch

My Feedback: (162)

Public Attourney?

JBanks523

My Feedback: (17)

Here is the link for the Jtec 40% Vid: http://scmike.com/jbanks/LouExtra.wmv

Please right click and save, dont stream! Enjoy!

Banker

My Feedback: (10)

I guess P.A. does not mean anything.

PlaneKrazee

My Feedback: (14)

John,

I couldn't get the video to download, any thoughts?

Thanks

Shortman

My Feedback: (21)

Bandwidth I bet