Need install pics of G26
07-14-2004, 12:11 PM
#1
Junior Member
Thread Starter
Join Date: Nov 2002
Location: Phoenix, AZ
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Need install pics of G26
Does anyone have any pictures of the Zenoah G26 installed on a Hangar 9 J-3 Cub..?
I am installing it and have been reading as many threads on the little Do's and Do not's as I can find but it seems there are so many different variations it becomes confusing. I have it mounted on the firewall (spacer problem solved) what I'm looking for are pics of the carb and throttle hook ups, ie. throttle arm and chock positioning I have installed the Slimline Pitts muffler, I have verified that the throttle plate screw when closed is showing the threads not the head. They say a pictures worth a thousand words...Thanks, Mattt
I am installing it and have been reading as many threads on the little Do's and Do not's as I can find but it seems there are so many different variations it becomes confusing. I have it mounted on the firewall (spacer problem solved) what I'm looking for are pics of the carb and throttle hook ups, ie. throttle arm and chock positioning I have installed the Slimline Pitts muffler, I have verified that the throttle plate screw when closed is showing the threads not the head. They say a pictures worth a thousand words...Thanks, Mattt
11-17-2004, 10:49 PM
#3
Senior Member
My Feedback: (1)
Join Date: Jun 2004
Location: Ciudad del CarmenCampeche, MEXICO
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
RE: Need install pics of G26
If you come across a few pics on this engine but on a GSP Focke Wulf 190, I'll appreciate it too.
Mauricio
Mauricio
