jh

HI there i think my dragonfly 2 is broke. Just before i went too fly it and for soem reason it just took off straight up out of control.

I have just tried it again and now i get nothing from the main motor but the tail still runns. I swaped the main motor for the tail rotar and the main motor still works so i have a problem with eth main motor channel... [:-]

K does any one know why the thr channel is not working, And what are the settings for the dip switches on the back of the transmitter.

here is a photo of my helicopter

mark3000

try changing the dip switch for the throttle channel (should be in your manual).

VinceHerman

Or you burned out a FET on your mixing board. Is there any sign of burned components on the printed circuit board?

jh

which of the dip switchs do i changeas it is not noted in the manual