Fuji + Krumscheid
#1
Junior Member
Thread Starter
Join Date: Nov 2004
Location: Trelleborg, SWEDEN
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Fuji + Krumscheid
Has anyone tried a Krumscheid silencer with a Fuji gas engine?
I have a Bisson wraparound on my Fuji BT50 and it reduced the noise of the stock muffler and I got the same revs. But I think that the Krumscheid KS86-V4 could both increase power and also reduce noise even more than the Bisson.
I have a Bisson wraparound on my Fuji BT50 and it reduced the noise of the stock muffler and I got the same revs. But I think that the Krumscheid KS86-V4 could both increase power and also reduce noise even more than the Bisson.
#3
Senior Member
My Feedback: (23)
Join Date: Jan 2002
Location: Houston, TX
Posts: 3,227
Likes: 0
Received 0 Likes
on
0 Posts
RE: Fuji + Krumscheid
If I can find header for the Fuji engines, I would test them with tuned pipes in a instant.
Besides, I've got an empty hair spray can some 18" long, which came from a professional hair salon. I am just dying to turn it into a gigantic "mousse pipe".
Besides, I've got an empty hair spray can some 18" long, which came from a professional hair salon. I am just dying to turn it into a gigantic "mousse pipe".
#4
Junior Member
Thread Starter
Join Date: Nov 2004
Location: Trelleborg, SWEDEN
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
RE: Fuji + Krumscheid
You can check the Krumscheid products at http://www.krumscheid-metallwaren.de...y_muffler.html
They have told me that the KS86-V4 would work very well with the Fuji BT50. When they tested this silencer on a ZN38 they got 6600rpm with a Menz 20x10.
Of course the tuned pipe KS1060 would give more power but I do not want to have the "turbo jump" when flying IMAC.
They have told me that the KS86-V4 would work very well with the Fuji BT50. When they tested this silencer on a ZN38 they got 6600rpm with a Menz 20x10.
Of course the tuned pipe KS1060 would give more power but I do not want to have the "turbo jump" when flying IMAC.