Skyburner Questions
#1
Senior Member
Thread Starter
Join Date: Dec 2001
Location: North of Toronto Canada
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Skyburner Questions
I am looking at building a Skyburner 60 for my first ducted fan project. I would like opinions from skyburner pilots. I have an OS 91 and Ramtec lined up.
I have a 200 foot grass field to fly from. Will this project work?
Any building opinions or suggestions please. I have the original MAN issue and the plans. At this time I am looking at fixed gear and installing retracts later.
I have a 200 foot grass field to fly from. Will this project work?
Any building opinions or suggestions please. I have the original MAN issue and the plans. At this time I am looking at fixed gear and installing retracts later.
#2
My Feedback: (56)
Join Date: Dec 2001
Location: Steens,
MS
Posts: 447
Likes: 0
Received 0 Likes
on
0 Posts
Skyburner
I've built it and if I did it over again I would build the wings to be removeable instead of a one piece unit. I enclosed the elevator pushrod just in case of a gear up landing. Other than that it's per plans. I'm in the process of covering it this winter. Will have a OS 77 in a Ramtec fan in it first. Later plan to replace the OS 77 with a Rossi 90 to really "burn up the sky". Hope this helps. Happy Holidays!
Stan
Stan
#4
My Feedback: (56)
Join Date: Dec 2001
Location: Steens,
MS
Posts: 447
Likes: 0
Received 0 Likes
on
0 Posts
avatar
Oh man...I finally figured out how to put one on and it just happened to be this one. Actually, after looking at the various ones I 've seen, I like this one the best. But thanks for asking!
#6
Senior Member
Thread Starter
Join Date: Dec 2001
Location: North of Toronto Canada
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Skyburner Questions
I have a number of shots of the MiG and this one also struck my fancy. Ideally one from a more forward angle (so the off boresight helmet mounted missle sights are in parameters) would be better, but what the hell!
I just picked up the wood and am still trying to verify the fan and engine for the 'burner. Anyone who reads this list able to cut wings in Toronto area?
I am thinking of schemes, and one I thought of is a manufacturers' demo version. I would like to make flags for every country where someone has built a skyburner. Any takers? I know Canada, USA and Austrailia. What about others??
Stephen
I just picked up the wood and am still trying to verify the fan and engine for the 'burner. Anyone who reads this list able to cut wings in Toronto area?
I am thinking of schemes, and one I thought of is a manufacturers' demo version. I would like to make flags for every country where someone has built a skyburner. Any takers? I know Canada, USA and Austrailia. What about others??
Stephen