There's a new Kat in town, and she's BAD!!
02-09-2005, 03:46 PM
#1
Thread Starter
My Feedback: (1)
Join Date: Jan 2002
Location: Mercedes,
TX
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
There's a new Kat in town, and she's BAD!!
[8D] Scroll down in this forum and have a look at the lastest BVM Kingcat project...and enjoy....we knew it had to be done....she was begging for it!! 15 sheets of Promark rivets w/1 sheet of raise panels, 1 sheet of F-4 nomenclature. It features BV's F-4 wing tanks, flashing nav lights, real stobes in the tail, a telescoping tail-hook and full cockpit detail. My 64 oz epoxy carbon tanks snuggles in between Bv's conformals for some extra go juice or smoke oil. Guidance by JR, and push by AMTUSA's AT-280..... stroked a little! Enjoy while I down a couple of Mararitas and uncross my eyes from those darned rivets! I'm back boys!
Jack Holland
Jack Holland
02-09-2005, 03:57 PM
#2
Senior Member
My Feedback: (5)
Join Date: Dec 2001
Location: League City,
TX
Posts: 1,007
Likes: 0
Received 0 Likes
on
0 Posts
RE: There's a new Kat in town, and she's BAD!!
Jack,
I'll PM you my address for delivery
Looks good bro! I will probably be down in the Valley some time around March, would like to swing by and check out your shop. Where are you guys flying jets now down there?
JR Gautreaux
I'll PM you my address for delivery
Looks good bro! I will probably be down in the Valley some time around March, would like to swing by and check out your shop. Where are you guys flying jets now down there?
JR Gautreaux
02-09-2005, 09:57 PM
#9
Thread Starter
My Feedback: (1)
Join Date: Jan 2002
Location: Mercedes,
TX
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
RE: There's a new Kat in town, and she's BAD!!
Thanks guys,
It's great to be back 110%. I sold that airboat...it was a kool toy, but there wasn't enough Jack to go around for the fishing, hunting, airboat ride thing, AND taking of my loyal guys customers. I had hit 40 and went thru a MLC(mid-life crisis) got this boat, captains note, etc... gonna get rich...yada,yada...While I have to admit that 60 MPH across 1/2" of water was VERY kool, 200mph+ is much better. I missed my friends, and the Jet-A. I really want to thank David Reid for allowing me to "rack" his Kingcat around the Austin sky last April. Then my "Homie" Phil Nuza gave me a few laps on his AT-280 Pegasus powered Super Bandit at Miss. Afterburner to drive it home. This got the BV kool-aid flowing threw the veins again. I will be at Austin, with a NEW jet, and it's name is Jackknife and it's BIG...AT-450 powered. Hang on!!
Jack
It's great to be back 110%. I sold that airboat...it was a kool toy, but there wasn't enough Jack to go around for the fishing, hunting, airboat ride thing, AND taking of my loyal guys customers. I had hit 40 and went thru a MLC(mid-life crisis) got this boat, captains note, etc... gonna get rich...yada,yada...While I have to admit that 60 MPH across 1/2" of water was VERY kool, 200mph+ is much better. I missed my friends, and the Jet-A. I really want to thank David Reid for allowing me to "rack" his Kingcat around the Austin sky last April. Then my "Homie" Phil Nuza gave me a few laps on his AT-280 Pegasus powered Super Bandit at Miss. Afterburner to drive it home. This got the BV kool-aid flowing threw the veins again. I will be at Austin, with a NEW jet, and it's name is Jackknife and it's BIG...AT-450 powered. Hang on!!
Jack
02-10-2005, 12:42 AM
#12
RE: There's a new Kat in town, and she's BAD!!
Looks good Jack! You won't have that baby long. Someone is going to offer you such a big number, that you will have to let her go. Can't hardly wait to see the "Jackknife". Good to have you back burning that good old Jet-A.
The General
The General
02-10-2005, 05:18 AM
#13
Senior Member
My Feedback: (7)
Join Date: Jan 2002
Location: missouri city,
TX
Posts: 481
Likes: 0
Received 0 Likes
on
0 Posts
RE: There's a new Kat in town, and she's BAD!!
"jackknife"...i love that name...its too kewl.....and it fits that monster plane to a tee.....
and jack....bring the banjo will ya...we be doin some pickin
paul and i will see you in austin...if not before
gregg bingham
and jack....bring the banjo will ya...we be doin some pickin
paul and i will see you in austin...if not before
gregg bingham
02-15-2005, 03:43 PM
#17
Thread Starter
My Feedback: (1)
Join Date: Jan 2002
Location: Mercedes,
TX
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
RE: There's a new Kat in town, and she's BAD!!
Thanks guys for the kind words. As for the Jackknife, the prototype is in base -white finish. Glennis out-did themselves for a "special edition" Jackknife type wheel that you have to see to believe. Wing is being finished NOW!! ALL MOLDS ARE FINISHED. Next will be the molded wing.
Stay tuned General, and Hornet Driver. Bypass, tailpipe, inlet coupler..done,done,done! Crystal clear canopy is done! Jet will handle the Blue Box F-15 cockpit. Margaritas get loaded before the Jet-A. See ya at Austin. Will update site pics as soon as the wing is bolted on.
Jack
Stay tuned General, and Hornet Driver. Bypass, tailpipe, inlet coupler..done,done,done! Crystal clear canopy is done! Jet will handle the Blue Box F-15 cockpit. Margaritas get loaded before the Jet-A. See ya at Austin. Will update site pics as soon as the wing is bolted on.
Jack
]
02-17-2005, 09:19 PM
#22
Senior Member
Join Date: Jan 2005
Location: MESA,
AZ
Posts: 262
Likes: 0
Received 0 Likes
on
0 Posts
RE: There's a new Kat in town, and she's BAD!!
AHHHHH.....WHEN A MASTER RETURNS THE RESULTS ARE ALWAYS EXCITING.GREAT JOB JACK.GOOD TO SEE YA IN THE SADDLE AGAIN.NOW ABOUT THIS JACKKNIFE........?
02-18-2005, 11:55 PM
#23
Junior Member
Join Date: Feb 2005
Location: Rio Hondo,
TX
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
RE: There's a new Kat in town, and she's BAD!!
Nice work Jack. I can't wait to see the Jacknife streaking across the sky. The Glinnes wheels were worth the wait. A one of a kind wheel for a one of a kind Jet. Just don't forget us little guys when you become a household name. See you at Tejas buddy.
