32cc homelite @ 10,522 RPM's
#1
Junior Member
Thread Starter
Join Date: Aug 2002
Location: Orlando,
FL
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
32cc homelite @ 10,522 RPM's
Hey guys I have a 32cc homelite engine from a weedwacker , and I was wondering if there is any good page with homelite engine mods, porting, timing advance etc etc. I'm getting a reading of 10,522rpms without the muffler and without load, but I would love to have at least 9,000rpm with a 16x10 3 blade pusher prop for my Air propelled one person kayak.
Any links? thanks.
Any links? thanks.
#2
Senior Member
Join Date: Mar 2002
Location: Lodi,
CA
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
32cc homelite @ 10,522 RPM's
try www.carrprecision.com or RCIGN who is on here and has done great work for me and my US41
#4
My Feedback: (40)
Join Date: Dec 2001
Location: Waynetown,
IN
Posts: 2,476
Likes: 0
Received 0 Likes
on
0 Posts
32cc homelite @ 10,522 RPM's
I do not really want to burst your bubble, but I think you might be more likely to get around 6,ooo rpm. MAYBE slightly higher. Switch to a 2 blade, you will get even more, but you won't get near your 9,ooo rpm wish.
#5
Junior Member
Thread Starter
Join Date: Aug 2002
Location: Orlando,
FL
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Well
Originally posted by CAPtain232
I do not really want to burst your bubble, but I think you might be more likely to get around 6,ooo rpm. MAYBE slightly higher. Switch to a 2 blade, you will get even more, but you won't get near your 9,ooo rpm wish.
I do not really want to burst your bubble, but I think you might be more likely to get around 6,ooo rpm. MAYBE slightly higher. Switch to a 2 blade, you will get even more, but you won't get near your 9,ooo rpm wish.
but that engine was stock I switch to homelite because there is more mods for this engine and until now I have the same RPM without load on both engines. I use TORCO RACING OIL for 2 cycle engine. Works better than the cheap trimmer oil.