Pictures of my Savage Racer
#1
Junior Member
Thread Starter
Join Date: Jun 2006
Location: Perth, AUSTRALIA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Pictures of my Savage Racer
I hope you like it guys.
The current specs are:
HPI Savage 25 Limited Edition
Hitec HSC-5998TG steering servo
Hitec HS-925MG throttle servo
Sanwa M11 radio with Spektrum Pro module and receiver
Venom hump pack
Pro-Line 23mm hex conversion
Pro-Line 40 series wheels and tyres
Nova shock towers
Mugen big bore shocks
HPI aluminium clutch shoes
HPI wheelie bar...................
The current specs are:
HPI Savage 25 Limited Edition
Hitec HSC-5998TG steering servo
Hitec HS-925MG throttle servo
Sanwa M11 radio with Spektrum Pro module and receiver
Venom hump pack
Pro-Line 23mm hex conversion
Pro-Line 40 series wheels and tyres
Nova shock towers
Mugen big bore shocks
HPI aluminium clutch shoes
HPI wheelie bar...................
#3
Senior Member
My Feedback: (3)
Join Date: Jan 2005
Location: Macon,
GA
Posts: 22,095
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pictures of my Savage Racer
LCG chassis makes a BIG difference. I would not have though it would help so much until I ran a set. Raced my Savage in its first race last Saturday and won against Revo’s.
#4
Senior Member
Join Date: Jan 2006
Location: WhitstableKent, UNITED KINGDOM
Posts: 1,266
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pictures of my Savage Racer
Does the LCG chasis compromise bashing. If I do a big jump, will it hold up. I now do some racing and some bashing, but dont want to do a big jump and find the chasis hits the ground and sends shock waves through the car.
#5
Senior Member
Join Date: Jun 2006
Location: cape girardeau,
MO
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pictures of my Savage Racer
thats a good looking truck.
and where can i get a fair price on some LCG plates and what all do i have to change to use them.
and where can i get a fair price on some LCG plates and what all do i have to change to use them.
#6
Senior Member
Join Date: Dec 2005
Location: Southeastern,
NC
Posts: 2,997
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pictures of my Savage Racer
Very nice truck HYPA! That's gonna be a serious MT.
Seeing those Mugens makes me sad... A few months ago I had the chance to buy a complete rebuilt set with springs for $60 from one of their sponsored drivers and I passed before I really gave it much thought. That's a damn $120 setup... [:@]
Seeing those Mugens makes me sad... A few months ago I had the chance to buy a complete rebuilt set with springs for $60 from one of their sponsored drivers and I passed before I really gave it much thought. That's a damn $120 setup... [:@]
#7
Senior Member
Join Date: Nov 2004
Location: perth, AUSTRALIA
Posts: 1,716
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pictures of my Savage Racer
That's a nice savage...If you get an extended chassis, You have to get the extended arms.
also, what type of tyres are those???
Here's my savvy
also, what type of tyres are those???
Here's my savvy
#8
Senior Member
Join Date: Jul 2005
Location: Torchy the Fiery Fast RC Turtl
Posts: 10,544
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pictures of my Savage Racer
ORIGINAL: -sif- Midget
That's a nice savage...If you get an extended chassis, You have to get the extended arms.
also, what type of tyres are those???
Here's my savvy
That's a nice savage...If you get an extended chassis, You have to get the extended arms.
also, what type of tyres are those???
Here's my savvy
#9
Senior Member
My Feedback: (3)
Join Date: Jul 2004
Location: Norwood,
OH
Posts: 22,101
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pictures of my Savage Racer
ORIGINAL: tat2d2dope
thats a good looking truck.
and where can i get a fair price on some LCG plates and what all do i have to change to use them.
thats a good looking truck.
and where can i get a fair price on some LCG plates and what all do i have to change to use them.
pic of my savage torn down with the LCG chassis installed:
comparing stock X plates and Chronic's plates:
#11
Senior Member
Join Date: Jul 2005
Location: Torchy the Fiery Fast RC Turtl
Posts: 10,544
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pictures of my Savage Racer
Give him time. After all, he may be caught up in other more pressing issues. Seeing the pics of some of his custom TVPs, I have no doubt that he will pull through and geti 'em done!
#13
Senior Member
Join Date: Dec 2005
Location: Southeastern,
NC
Posts: 2,997
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pictures of my Savage Racer
ORIGINAL: tat2d2dope
last time i asked chronic he said they weren't ready yet.
maybe he just don't want my money []
last time i asked chronic he said they weren't ready yet.
maybe he just don't want my money []
I hate that it has been this way, but I have had to put several people off here lately. We manufacture a product that requires independant testing. The standards were changed and we apparently were never notified of the changes or the deadline for them to be completed. Everyone at the shop has been running around trying to make the needed changes before UL yanked our listing. It's all squared away now and I can get back on top of these things for anyone who needs them. Sorry about that.
#16
Junior Member
Thread Starter
Join Date: Jun 2006
Location: Perth, AUSTRALIA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pictures of my Savage Racer
Thanks for the kind words guys. The tyres are Pro-Line 40 series Crime Fighters. The shocks are Mugen MBX5 rear buggy shocks. I have considered getting an lcg chassis but I don't like the fact that you can't use a roto-start with them. I have also looked at the extended arms but far too much weight imo. I ordered a few more bits for my truck today and hopefully I will have them next week.
I ordered:
Lunsford Racing titanium upgrade kit (includes turnbuckles, hingepins, ball ends and ball type screws)
HPI purple aluminium tuned pipe
HPI adjustable upper arm set
HPI graphite arm brace set
HPI aluminium fuel tank mount
HPI heavy duty heatsink engine mount
HPI 3mm tvp graphite chassis set
OFNA throttle servo linkage kit
Hopefully these parts will help the car handle better and improve it's throttle and braking response.
More pics when I put it all together.
I ordered:
Lunsford Racing titanium upgrade kit (includes turnbuckles, hingepins, ball ends and ball type screws)
HPI purple aluminium tuned pipe
HPI adjustable upper arm set
HPI graphite arm brace set
HPI aluminium fuel tank mount
HPI heavy duty heatsink engine mount
HPI 3mm tvp graphite chassis set
OFNA throttle servo linkage kit
Hopefully these parts will help the car handle better and improve it's throttle and braking response.
More pics when I put it all together.
#18
Junior Member
Thread Starter
Join Date: Jun 2006
Location: Perth, AUSTRALIA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pictures of my Savage Racer
Do the stock outdrives break or something?
I got my parts and I have started putting them on the car, I will put up some pics soon [&:]
I got my parts and I have started putting them on the car, I will put up some pics soon [&:]