Look Mom- No Hands
#1
Junior Member
Thread Starter
Join Date: Oct 2006
Location: Bay City, MI
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Look Mom- No Hands
#6
Junior Member
Thread Starter
Join Date: Oct 2006
Location: Bay City, MI
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
RE: Look Mom- No Hands
The Joto3.3 is way over powered with the 3.3 and I race with weight in the center battery compartment anyway. The traction was incressed and the car still flew well over the jump at our local track. The other Jato's I run against are .12. This is my fun car.
I didn't see any instruction in a magazine.
Whitey? What components did they use?
I used two parts + Battery from my RC18B
1. PicoSwitch from Dimension Engineering
2. 4580 Control Box from Traxxas
4.77 oz Battery NiMh (This will be changed to LiPo)
1.95 oz Circuit board, connectors, and wires. (This can be reduced)
I didn't see any instruction in a magazine.
Whitey? What components did they use?
I used two parts + Battery from my RC18B
1. PicoSwitch from Dimension Engineering
2. 4580 Control Box from Traxxas
4.77 oz Battery NiMh (This will be changed to LiPo)
1.95 oz Circuit board, connectors, and wires. (This can be reduced)
#8
Senior Member
Join Date: Apr 2006
Location: montreal,
QC, CANADA
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
RE: Look Mom- No Hands
sorry i dont have the magazine but u can try google . how would u prime it?
ORIGINAL: RaisingSteam
The Joto3.3 is way over powered with the 3.3 and I race with weight in the center battery compartment anyway. The traction was incressed and the car still flew well over the jump at our local track. The other Jato's I run against are .12. This is my fun car.
I didn't see any instruction in a magazine.
Whitey? What components did they use?
I used two parts + Battery from my RC18B
1. PicoSwitch from Dimension Engineering
2. 4580 Control Box from Traxxas
4.77 oz Battery NiMh (This will be changed to LiPo)
1.95 oz Circuit board, connectors, and wires. (This can be reduced)
The Joto3.3 is way over powered with the 3.3 and I race with weight in the center battery compartment anyway. The traction was incressed and the car still flew well over the jump at our local track. The other Jato's I run against are .12. This is my fun car.
I didn't see any instruction in a magazine.
Whitey? What components did they use?
I used two parts + Battery from my RC18B
1. PicoSwitch from Dimension Engineering
2. 4580 Control Box from Traxxas
4.77 oz Battery NiMh (This will be changed to LiPo)
1.95 oz Circuit board, connectors, and wires. (This can be reduced)
#9
Junior Member
Thread Starter
Join Date: Oct 2006
Location: Bay City, MI
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
RE: Look Mom- No Hands
Whitey? how would u prime it?
I have been priming and cold starting the car with the hand held stick, then hook up the little on board 7.2v battery for the remote start.
The idle stop should be set so low that it dies after about 4-6 seconds if you need to use the brakes.
This setup can be improved upon!
I have been priming and cold starting the car with the hand held stick, then hook up the little on board 7.2v battery for the remote start.
The idle stop should be set so low that it dies after about 4-6 seconds if you need to use the brakes.
This setup can be improved upon!
#10
Senior Member
Join Date: Dec 2003
Location: .,
ON, CANADA
Posts: 727
Likes: 0
Received 0 Likes
on
0 Posts
RE: Look Mom- No Hands
can you do me a favor and put upload this video to a different site or host the video somewhere to download, I have tried 3 times and am unable to view it and everytime it crashes my entire browser.
I really would like to see this
Nick
I really would like to see this
Nick
#11
Junior Member
Thread Starter
Join Date: Oct 2006
Location: Bay City, MI
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
RE: Look Mom- No Hands
Posted on RC Videos.
The video I missed was its debut at the last race of the season where I was waiting at the start line for a few minutes and kept starting and taking a warm up lap then shutting it off from the drivers stand. During the pit, I would shut it off so I could talk to the Pit man/woman.
The video I missed was its debut at the last race of the season where I was waiting at the start line for a few minutes and kept starting and taking a warm up lap then shutting it off from the drivers stand. During the pit, I would shut it off so I could talk to the Pit man/woman.
ORIGINAL: Lord_Nick_D
can you do me a favor and put upload this video to a different site or host the video somewhere to download, I have tried 3 times and am unable to view it and everytime it crashes my entire browser.
I really would like to see this
Nick
can you do me a favor and put upload this video to a different site or host the video somewhere to download, I have tried 3 times and am unable to view it and everytime it crashes my entire browser.
I really would like to see this
Nick
#13
Senior Member
Join Date: Apr 2005
Location: glenwood,
IL
Posts: 1,037
Likes: 0
Received 0 Likes
on
0 Posts
RE: Look Mom- No Hands
the magazine is called extreme Rc I new that this could be done And thought about it many times and now someone finally did it lol that is so funny
#14
Senior Member
Join Date: Aug 2006
Location: North Fort Myers FL, FL
Posts: 761
Likes: 0
Received 0 Likes
on
0 Posts