Servo's required for 33% SI Weeks Solution with modifications
02-20-2003, 07:11 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2003
Location: Kilkennyn/a, IRELAND
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Servo's required for 33% SI Weeks Solution with modifications
I have a 33% SI Weeks Solution to be powered by a 3W-70, I have brand new profi-digi servos for each aileron, but still need to get elevator and a rudder servo.
Would a normal profi do for each aileron. What torque would I require for Rudder?
6V or 4.8V, has anybody used multiplex's battery harness?
Cheers
Paul
Would a normal profi do for each aileron. What torque would I require for Rudder?
6V or 4.8V, has anybody used multiplex's battery harness?
Cheers
Paul
03-01-2003, 06:41 PM
#4
My Feedback: (3)
Join Date: Mar 2003
Location: Spring,
TX
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
Servo's required for 33% SI Weeks Solution with modifications
I would go with the 6.0v and probably 110+ oz. of tq. on each elevator half and probably 2 of those servos on the rudder.
I have the aeroworks 33% Edge 540T (105") and have (2) 130 oz servos on each aileron and (2) 180 oz servos on the rudder and (1) 180 oz on each elevator half.
I have not been dissapointed so far and have 37 flights on them.
I have the aeroworks 33% Edge 540T (105") and have (2) 130 oz servos on each aileron and (2) 180 oz servos on the rudder and (1) 180 oz on each elevator half.
I have not been dissapointed so far and have 37 flights on them.
