Go Back  RCU Forums > RC Airplanes > Tips & Techniques
Reload this Page >

Preflight-PreflightPostflight?

Community
Search
Notices
Tips & Techniques Want to share a tip or special technique you have either in the workshop or at the flying field or race track? Post it right here!

Preflight-PreflightPostflight?

Thread Tools
 
Search this Thread
 
Old 08-04-2007, 10:15 PM
  #1  
deltatech
Senior Member
Thread Starter
 
Join Date: Feb 2002
Location: wharton, NJ
Posts: 212
Likes: 0
Received 0 Likes on 0 Posts
Default Preflight-PreflightPostflight?

I flew my Top Flite DC-3 today and the conditions were perfect[8D]. I had 3 great flights and decided to pack it in for the day. Sometimes I have to leave quickly and do a fast clean up but today I wanted to really clean my baby "I fly from a grass field so things get dirty". I cleaned the retracts and wheel wells. I double cleaned the entire plane.
During this very detailed job I noticed somthing was definately wrong. I noticed that the left aileron servo was very loose. When I got home I pulled the hatch and found that the servo was missing 2 screws on one side. They must have backed out and fell through the control arm hole.
I usually do a good preflight. I assemble the DC-3 looking over all internal workings as I go. I get the engines set up the way I like and then do a full walk around like I was going to fly the real deal. I check everything - retracts - control surfaces - engines from the firewall forward and so on. I push and pull I listen and look for anything out of the ordenary. I found nothing wrong before each flight.
I guess The moral of the story is to do a detailed clean up on your model it may reveal more than a clean airplane!
Old 08-06-2007, 11:38 AM
  #2  
FlyerInOKC
My Feedback: (6)
 
FlyerInOKC's Avatar
 
Join Date: Nov 2004
Location: Oklahoma City, OK
Posts: 14,347
Received 309 Likes on 264 Posts
Default RE: Preflight-PreflightPostflight?

Its amazing what good preflight and postflight routines can show. That cleaning job just may have save you from a rebuild job. Its a good example for all us R/C flyers to follow. yjanks for posting it.
Old 08-06-2007, 11:55 AM
  #3  
cstevenpeterson
My Feedback: (21)
 
Join Date: Oct 2003
Location: Blairstown, NJ
Posts: 491
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Preflight-PreflightPostflight?

Hi Deltatech,

Were you flying this at the last TONJ meeting in July? Nice looking plane - flies even nicer! It would have been a real shame to lose it, especially over something like that. Folks always comment on how meticulous I am with my birds - especially when I clean them like you do. It goes to show, you can never be too thorough or cautious. I used to race full sized dirt track cars and I was like that then - clean cars (planes) run better and safety is paramount - especially when it's your own butt in the seat! I guess it spilled over into the Hobby.[8D]

Steve
Old 08-06-2007, 08:55 PM
  #4  
deltatech
Senior Member
Thread Starter
 
Join Date: Feb 2002
Location: wharton, NJ
Posts: 212
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Preflight-PreflightPostflight?

I totally agree guys! Safety first! You can never be to cautious,

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Contact Us - Manage Preferences Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.