Gaui ain't leaving any money on the table.
#1
Senior Member
Thread Starter
Join Date: Nov 2007
Location: , AZ
Posts: 653
Likes: 0
Received 0 Likes
on
0 Posts
Gaui ain't leaving any money on the table.
The 425EP is now available for a paltry $499.00. Guess I'll wait three more days for the Esky 900.
Hurricane425 CF Kit Includes :
1. Carbon Frames,
2. GAUI 1500w / 1100kv BL Motor
3. GAUI50A ESC with Heat Radiator
4. GAUI BEC
5. Fiber Glass White Canopy
6. GAUI 425mm Fiber Glass Blades
Hurricane425 CF Kit Includes :
1. Carbon Frames,
2. GAUI 1500w / 1100kv BL Motor
3. GAUI50A ESC with Heat Radiator
4. GAUI BEC
5. Fiber Glass White Canopy
6. GAUI 425mm Fiber Glass Blades
#3
My Feedback: (37)
RE: Gaui ain't leaving any money on the table.
For the same size as the Trex 500, I would go Trex all the way. You can get the Trex 500 GF for less than that. I don't mind all the gearing and bell cranks on the 550 because it is bigger but to deal with it on a smaller Gaui is really not worth it.
#5
Senior Member
Join Date: Dec 2005
Location: Kingston,
GA
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
RE: Gaui ain't leaving any money on the table.
have you looked at the frame for the Gaui 425? it looks like they chopped the front off the 550 and slapped a short boom on it... I really think Gaui dropped the ball on this one. it's almost like they were in a rush to have something...anything that was in the same size market as the trex 500..there is no way I'd ever think about buying one.. I'm going to buy a 550.. it's bigger and cost a lot less..