Engine shaft
06-21-2003, 03:49 AM
#1
Member
Thread Starter
Join Date: May 2003
Location: Penang, MALAYSIA
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Engine shaft
Hi all, may I know that how to know or mention on engine shaft?? Long, short?? SG is for what?? And how to know our RC can install long or short shaft?? Thanks.
khoo
khoo
06-21-2003, 01:08 PM
#2
Senior Member
My Feedback: (5)
Join Date: Dec 2002
Location: Pella, IA
Posts: 2,213
Likes: 0
Received 0 Likes
on
0 Posts
Engine shaft
Your car either uses a Threaded or SG style shaft
SG:
http://www2.towerhobbies.com/cgi-bin...?&I=LXDUH4&P=7
threaded:
http://www2.towerhobbies.com/cgi-bin...?&I=LXDUH5&P=7
Notice the threaded needs a clutch nut and the SG has the pilot shaft built into it.
SG:
http://www2.towerhobbies.com/cgi-bin...?&I=LXDUH4&P=7
threaded:
http://www2.towerhobbies.com/cgi-bin...?&I=LXDUH5&P=7
Notice the threaded needs a clutch nut and the SG has the pilot shaft built into it.
06-21-2003, 10:31 PM
#3
Member
Thread Starter
Join Date: May 2003
Location: Penang, MALAYSIA
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Engine shaft
That mean all the RC can use both type of engine?? The car with centex clutch must use SG and without centex need to use threadad?? Thanks.
