flying wire and building suggestions
#1
Junior Member
Thread Starter
My Feedback: (3)
Join Date: Jan 2002
Location: FL
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
flying wire and building suggestions
I am in the process of building 1/4 scale Waco YMF 5 bi plane. First question is does any one have pictures of the attach points for the flying wires. Both at the cabanes and wings. I have searched the Waco sites and have exhausted any other souces of information. I have found several pictures, but nothing that really shows the detail I am looking for. This is being built from Dr. Pepino plans. All information from anyone who has built this model would be appreciated. Any difficulties encountered during the assembly would help me in the process. One problem I encountered was the description of the supplemental spar arrangement. This cannot be accomplished as per the plans(agreed with by several other builders).
A reply to my email would be appreciated. [email protected]
One good suggestion is worth hours of work.
Thanks
A reply to my email would be appreciated. [email protected]
One good suggestion is worth hours of work.
Thanks
#3
My Feedback: (16)
Join Date: Mar 2005
Location: spring valley ,
CA
Posts: 1,309
Likes: 0
Received 0 Likes
on
0 Posts
RE: flying wire and building suggestions
First off, I can't get that e-mail address you posted to work.
Second, go to the bottom of this page, type in these words Peter Barth Waco into the "search" window and look for a build thread by "redceaser" There may be some photos there that will help you..
Steve
Second, go to the bottom of this page, type in these words Peter Barth Waco into the "search" window and look for a build thread by "redceaser" There may be some photos there that will help you..
Steve