What do we have here??????
#1
Junior Member
Thread Starter
Join Date: Jul 2006
Location: clarkston,
MI
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
What do we have here??????
This is not my boat, however I did the offer to make it run better. Also I would like to know what is and perhaps the manufacturer. The owner of the hull does not know anything about it. So here are the pics.
#4
My Feedback: (3)
RE: What do we have here??????
ORIGINAL: Ron Olson
There's a boat that you won't see in Michigan every day! You must have the only one in the district if not for hundreds of miles around.
A rough shot would be that it came from overseas, Europe or South Africa.
It could be an Ossi.
There's a boat that you won't see in Michigan every day! You must have the only one in the district if not for hundreds of miles around.
A rough shot would be that it came from overseas, Europe or South Africa.
It could be an Ossi.
Not a bad looking boat - be interested in seeing how she goes
#6
Junior Member
Thread Starter
Join Date: Jul 2006
Location: clarkston,
MI
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
RE: What do we have here??????
The engine is definitely a clone. It seems to run okay however it would not transition from low speed to high speed very well. Since the boat has been in the club it hasn't even made it to the first turn. Some knuckle head used a grease gun hose for a stuffing shaft. I just replaced with a brass tube with no liner. Hopefully I can give it shot this weekend.
Thanks for all your help
Thanks for all your help
#8
Junior Member
Thread Starter
Join Date: Jul 2006
Location: clarkston,
MI
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
RE: What do we have here??????
I did replace the Diaphram with a walbro I had sitting around. It will transition better now however it seems really rich on the high side. I think it was like 2+ turns out on the high (Comparing to the zen or the rcmk). Like I mentioned earlier the boat has never made it to the first turn, so the chances of the engine being broke in is slim.
Do you recall what lake Darla runs on?
Do you recall what lake Darla runs on?
#9
My Feedback: (1)
RE: What do we have here??????
She did say something about running or trying to run at a club lake in Clarkston.
I have to give her a call as I haven't talked to her since she went in for surgery about a month ago. Maybe I'll give her a call tonight as I was going to last night but didn't. Darla might have some gas boat parts laying around.
I have to give her a call as I haven't talked to her since she went in for surgery about a month ago. Maybe I'll give her a call tonight as I was going to last night but didn't. Darla might have some gas boat parts laying around.
#10
Junior Member
Thread Starter
Join Date: Jul 2006
Location: clarkston,
MI
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
RE: What do we have here??????
Parts???????? I haven't broken it yet O yee of little faith. However I am going to drag this over to St Clair this weekend. So maybe you are right i will need the parts.
Will you be coming to the races the end of the month at Spencer park?
Will you be coming to the races the end of the month at Spencer park?
#11
My Feedback: (1)
RE: What do we have here??????
Probably not. I've got the big race to go to in Hobart, IN next weekend then have to get ready for the record trials in Flint. I missed the Saginaw race as that's one of my favorites but I didn't want to risk breaking anything before the Indy Masters.
I've been to the Rochester Hills race twice in the past. If you go, be careful in the launch area, it's slippery.
This weekend is nuts. I'm meeting up with a new member here Saturday to help him out with his new Sprint Cat then rolling up to Grand Rapids Sunday to help another guy get his new gas Sport hydro wet for the first time and maybe get my little Sport .12 going. Monday, final tuning before heading out Thursday AM for Hobart.
I've been to the Rochester Hills race twice in the past. If you go, be careful in the launch area, it's slippery.
This weekend is nuts. I'm meeting up with a new member here Saturday to help him out with his new Sprint Cat then rolling up to Grand Rapids Sunday to help another guy get his new gas Sport hydro wet for the first time and maybe get my little Sport .12 going. Monday, final tuning before heading out Thursday AM for Hobart.
#12
Junior Member
Thread Starter
Join Date: Jul 2006
Location: clarkston,
MI
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
RE: What do we have here??????
I don't race yet. However, my Sprint Cat just started get up around 55 - 60 so maybe next year I will have something to compete with.
Good luck in Hobart. Perhaps I will meet you at the Flint trials.
Good luck in Hobart. Perhaps I will meet you at the Flint trials.
#14
Senior Member
Join Date: Sep 2008
Location: Kuching, Sarawak, MALAYSIA
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
RE: What do we have here??????
Hi All,
Looks very much like this hull which is a Chinese product.
LOA is only 39". Test run in Johannesberg SA with a Stock Zen and they can tell you the performance.
Happy Boating all.
Latiff
Looks very much like this hull which is a Chinese product.
LOA is only 39". Test run in Johannesberg SA with a Stock Zen and they can tell you the performance.
Happy Boating all.
Latiff
#15
Senior Member
Join Date: Jul 2008
Location: Hialeah,
FL
Posts: 761
Likes: 0
Received 0 Likes
on
0 Posts
RE: What do we have here??????
Come guys this is an easy one... http://www.imexrc.com/servlet/the-15...NG-BOAT/Detail
IMEX boat, I have seen there products up close.... (personal opinion removed so as not to offend)
I will add this in response to a previous post "Some knuckle head used a grease gun hose for a stuffing shaft." no its built that way from IMEX.
Leo
IMEX boat, I have seen there products up close.... (personal opinion removed so as not to offend)
I will add this in response to a previous post "Some knuckle head used a grease gun hose for a stuffing shaft." no its built that way from IMEX.
Leo
#17
My Feedback: (1)
RE: What do we have here??????
Aw, come on Cheese, I know that you want to!
The past few years there have been some of the IMEX boats for sale at a booth at the Toledo show but I haven't seen that one there. The guys at the booth would make a used car salesman envious! I've never heard so many lines of BS in my life! So many unknowing souls walking away from the booth smiling ear-to-ear thinking that they had gotten the best deal at the show but felt sorry for them at the same time. Had they done a simple 180 they would have seen boats with much higher quality.
The past few years there have been some of the IMEX boats for sale at a booth at the Toledo show but I haven't seen that one there. The guys at the booth would make a used car salesman envious! I've never heard so many lines of BS in my life! So many unknowing souls walking away from the booth smiling ear-to-ear thinking that they had gotten the best deal at the show but felt sorry for them at the same time. Had they done a simple 180 they would have seen boats with much higher quality.
#18
Senior Member
Join Date: Jul 2008
Location: Hialeah,
FL
Posts: 761
Likes: 0
Received 0 Likes
on
0 Posts
RE: What do we have here??????
ORIGINAL: Ron Olson
Aw, come on Cheese, I know that you want to!
The past few years there have been some of the IMEX boats for sale at a booth at the Toledo show but I haven't seen that one there. The guys at the booth would make a used car salesman envious! I've never heard so many lines of BS in my life! So many unknowing souls walking away from the booth smiling ear-to-ear thinking that they had gotten the best deal at the show but felt sorry for them at the same time. Had they done a simple 180 they would have seen boats with much higher quality.
Aw, come on Cheese, I know that you want to!
The past few years there have been some of the IMEX boats for sale at a booth at the Toledo show but I haven't seen that one there. The guys at the booth would make a used car salesman envious! I've never heard so many lines of BS in my life! So many unknowing souls walking away from the booth smiling ear-to-ear thinking that they had gotten the best deal at the show but felt sorry for them at the same time. Had they done a simple 180 they would have seen boats with much higher quality.
Sad part of the whole thing is these same folks show up at the lake and want you to fix their 60mph boats . I have never turned anyone down but it sure does take away from the time I could be spending with my boat.
To everyone have a relaxing and safe Holiday weekend.
Leo