Mavpro

Anyone who have this combo installed? I have a question about fixing the brake housing to the gear leg.

Finn

rcpete347

My Feedback: (251)

HI, I drilled and tapped a 4/40 bolt through the brake houseing into the strut,worked OK, be sure to seal the bolt.
Rcpete

Mavpro

Thanks. Seems like a good solution. You see, the existing 4-40 bolt that exits the rear side of the housing confused me a little bit. The pictures coming from the mfg. shows this bolt not secured as a anti rotation pin. Did you use this bolt, or did you drill another hole through the housing?
Finn

rcpete347

My Feedback: (251)

HI, yes I used that bolt, just line it up with the strut and drill and tap.
Rcpete

Mavpro

Thanks again!
I'll do that :-)
Finn