Upgrade/Repairs...
#1
Senior Member
Thread Starter
Join Date: Apr 2004
Location: Corvallis,
MT
Posts: 529
Likes: 0
Received 0 Likes
on
0 Posts
Upgrade/Repairs...
Here is what I have in my tower hobbies shopping cart...
HPI Binder Head Screw M4x10mm Savage 21 (6)
HPI Flat Head Screw M3x18mm Savage (6)
HPI Flat Head Screw M2x10mm Savage 21 (10)
HPI Tap Binder Head Screw M4x10mm Savage 21 (6)
HPI Cap Head Screw M4x8mm Savage 21 (6)
Robinson Racing Steel Combo 48T/16T Savage
Ofna .27 Picco Rear Exhaust Pull Start
Motor Saver Inside/Outside Foam (1) (Dog ate it)
HPI 3-Piece Clutch Set Savage
O.S. 8 Glow Plug Standard Long Medium Hot -- x3
DuraTrax FlashPoint Infrared Temperature Gauge
Trinity Monster Horsepower 20% Quart -- x4
Combined: $306.08
with the $30 off coupon...
Thats basically what I need to get my Savage running again... Think it sounds good?
HPI Binder Head Screw M4x10mm Savage 21 (6)
HPI Flat Head Screw M3x18mm Savage (6)
HPI Flat Head Screw M2x10mm Savage 21 (10)
HPI Tap Binder Head Screw M4x10mm Savage 21 (6)
HPI Cap Head Screw M4x8mm Savage 21 (6)
Robinson Racing Steel Combo 48T/16T Savage
Ofna .27 Picco Rear Exhaust Pull Start
Motor Saver Inside/Outside Foam (1) (Dog ate it)
HPI 3-Piece Clutch Set Savage
O.S. 8 Glow Plug Standard Long Medium Hot -- x3
DuraTrax FlashPoint Infrared Temperature Gauge
Trinity Monster Horsepower 20% Quart -- x4
Combined: $306.08
with the $30 off coupon...
Thats basically what I need to get my Savage running again... Think it sounds good?
#2
RE: Upgrade/Repairs...
I like the screws kit from rcscrewz over the stock HPI screws. Also, you will probably get a gallon of fuel cheaper at your LHS than you are paying for 4 quarts from Tower. Just a thought.