Method for attaching a pilot
08-29-2005, 06:45 PM
#1
Thread Starter
My Feedback: (11)
Join Date: Sep 2002
Location: holland,
MI
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Method for attaching a pilot
Is there any tried and true method for attaching a pilot to his cockpit? I have a resin pilot that I need to put in a TF P-47. I have the cockpit kit, which is painted plastic. Can I just use epoxy? Is there a better method for getting him in there?
08-29-2005, 07:51 PM
#2
Join Date: Feb 2003
Location: Toronto,
ON, CANADA
Posts: 1,243
Received 0 Likes
on
0 Posts
RE: Method for attaching a pilot
I just used a screw through the bottom of the hatch deck and up into his body. [:@]
Held fine. He tended to squirm a bit as I inserted the screw but was fine after I gave him a little bit o'alcohol.
Held fine. He tended to squirm a bit as I inserted the screw but was fine after I gave him a little bit o'alcohol.
08-29-2005, 08:03 PM
#3
Senior Member
My Feedback: (2)
Join Date: Sep 2004
Location: Johns Creek,
GA
Posts: 7,457
Likes: 0
Received 0 Likes
on
0 Posts
RE: Method for attaching a pilot
Yep.... a screw up the pilots......well...you know...this is a family board
with a bit of epoxy for good measure....
I hadn't thought of giving any alcohol to the pilot.... I usually kept it all for myself!
with a bit of epoxy for good measure....
I hadn't thought of giving any alcohol to the pilot.... I usually kept it all for myself!
08-30-2005, 04:54 AM
#6
Senior Member
My Feedback: (1)
Join Date: Jul 2004
Location: Yukon,
OK
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
RE: Method for attaching a pilot
dont forget to put a Estes rocket parachute on his back w/static release. My buddies pilot(Booboo-the bigheaded labrador) ejected after his Twist was involved in a midair. He's still listed as MIA.
Com on Booboo, turn on your locator beacon![:@]
Com on Booboo, turn on your locator beacon![:@]
08-30-2005, 06:40 AM
#7
Senior Member
Join Date: Nov 2002
Location: RCHill,
NJ
Posts: 2,981
Likes: 0
Received 0 Likes
on
0 Posts
RE: Method for attaching a pilot
i used CA glue and it took five crashes to separate the pilots head from the fuse. Good thing it separated, because I was going to fire his azz. GL
RCF esq.
RCF esq.
08-30-2005, 06:20 PM
#8
Join Date: Jul 2003
Location: Merritt Island, FL
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
RE: Method for attaching a pilot
That was pretty funny SoonerAce. I had a mouthful of cashews when I read your estes rocket egres maneuver and spit them all over my monitor. Bout time I cleaned the darn thing anyway.
Bout time I cleaned the darn thing anyway.
08-31-2005, 06:59 PM
#10
Senior Member
Join Date: Aug 2003
Location: Andersonville, TN
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
RE: Method for attaching a pilot
Try attaching a piece of 1/32 hard ply to bottom of pilot (glue or screws) with corners that protrude enough to secure him (her) (it) to the bottom of cockkit with 2-3 small screws. Mine has to use restroom after each flight. Have not had one jump out yet, but they have leaned over the side, from time to time.
05-17-2006, 10:34 AM
#13
Senior Member
Join Date: Nov 2002
Location: WarfieldBerkshire, UNITED KINGDOM
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
RE: Method for attaching a pilot
Velcro is your friend ! It's removeable and cuts down somewhat on vibration transmitted to the item (not really a factor here)
05-27-2006, 11:00 PM
#14
Join Date: Jan 2006
Location: Placerville,
CA
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
RE: Method for attaching a pilot
I can attest that Silicone does NOT work. Had a Jack head in a GP Ultra Sport. 2nd tank of gas breaking in the engine, he lost his head. Spun faster than the keno balls up in Tahoe!! Epoxy and screw is now holding him in place, one eye and all .... Greg
