Cheap Sonic Racing Steel Pipe on ebay
#1
Senior Member
Thread Starter
Join Date: Apr 2006
Location: Queanbeyan, NSW, AUSTRALIA
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Cheap Sonic Racing Steel Pipe on ebay
If your after a cheap steel tuned pipe, including watercooled flange and muffler http://cgi.ebay.com.au/New-100-Degre...QQcmdZViewItem
Made by Sonic Racing so the quality is great and the price is even better. I've grabbed one for myself
Made by Sonic Racing so the quality is great and the price is even better. I've grabbed one for myself
#2
Senior Member
Join Date: Feb 2004
Location: Brisbane, AUSTRALIA
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
RE: Cheap Sonic Racing Steel Pipe on ebay
Thanks for your kind words John, I know you will be happy with it. George will have his engines back within 2 weeks for his Quad cat.
Cheers, Danny.
Cheers, Danny.
#4
Senior Member
Join Date: Apr 2007
Location: brisbane, AUSTRALIA
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
RE: Cheap Sonic Racing Steel Pipe on ebay
Danny, have you manufactured this pipes yourself or are they imported?. John is saying that you have made them yourself, if you have you have done a good job of them.Im just curious.Thanks.
#5
Senior Member
Join Date: Feb 2004
Location: Brisbane, AUSTRALIA
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
RE: Cheap Sonic Racing Steel Pipe on ebay
Pipe length is 12-5/8" or 320mm from the exhaust flange to the join in the cones better know as the tuned length. Total length including the muffler is 20" or 500mm.
Tony, I have them manufactured OS. They were going to cost over $200 to have them made locally. For a budget pipe, they work very well and being steel, you can easily cut and re-weld the manifold to any angle to suit any application. Will be running the 60" monos off Nudgee road before Nudgee Beach on Sunday from 7 to about 10 or 11am.
Cheers, Danny.
Tony, I have them manufactured OS. They were going to cost over $200 to have them made locally. For a budget pipe, they work very well and being steel, you can easily cut and re-weld the manifold to any angle to suit any application. Will be running the 60" monos off Nudgee road before Nudgee Beach on Sunday from 7 to about 10 or 11am.
Cheers, Danny.