Which MIP CVD kit for rc10gt rtr??
03-20-2003, 03:05 PM
#1
Member
Thread Starter
Join Date: Feb 2003
Location: Rob,
IL
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Which MIP CVD kit for rc10gt rtr??
i have been having trouble with the dogbones in my rtr and i'm getting tired of messing with them so i am going to cvd's before i install my fantom .15. my question is does the rtr have 1/4" axles or 3/16" axles? i want to order them now, but i dont have my car and calipers here to measure the axles. I dont recall the axles in my car looking like 1/4" but you never know. any help would be appreciated.
03-20-2003, 04:50 PM
#2
Senior Member
My Feedback: (5)
Join Date: Feb 2003
Location: Hillsboro,
OR
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
Which MIP CVD kit for rc10gt rtr??
I've got the new RC10GT RTR Plus which has 3/16" axels. I also have the MIP's and for me they are much nicer than the dogbones.
I hope this helps some.
I hope this helps some.
03-21-2003, 11:16 PM
#3
Senior Member
Join Date: Feb 2003
Location: Forbes, Minnesota
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Which MIP CVD kit for rc10gt rtr??
Even if they were 1/4 inch you only need to get 3/16 bearings to change it over , but i think they are all 3/16 pretty much
03-22-2003, 12:49 PM
#4
Senior Member
Which MIP CVD kit for rc10gt rtr??
The original GT RTR had 1/4 in. axles and the new plus RTR has 3/16 in. axles like all other GT's. If you truck has the 1/4 in. axles get the 3/16 in. MIP CVD's and the 3/16 rear bearings. The 3/16 bearing holds up so much better than the 1/4 in. bearings and the 3/16 in. wheels are much more common. Nows a good time to make the total upgrade.
03-22-2003, 10:47 PM
#5
Senior Member
Join Date: Oct 2002
Location: Arlington,
WA
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
Which MIP CVD kit for rc10gt rtr??
Originally posted by Nitro Flash
The original GT RTR had 1/4 in. axles and the new plus RTR has 3/16 in. axles like all other GT's. If you truck has the 1/4 in. axles get the 3/16 in. MIP CVD's and the 3/16 rear bearings. The 3/16 bearing holds up so much better than the 1/4 in. bearings and the 3/16 in. wheels are much more common. Nows a good time to make the total upgrade.
The original GT RTR had 1/4 in. axles and the new plus RTR has 3/16 in. axles like all other GT's. If you truck has the 1/4 in. axles get the 3/16 in. MIP CVD's and the 3/16 rear bearings. The 3/16 bearing holds up so much better than the 1/4 in. bearings and the 3/16 in. wheels are much more common. Nows a good time to make the total upgrade.
