Access Hatch
#1
Member
Thread Starter
My Feedback: (1)
Join Date: Dec 2002
Location: Lenoir City,
TN
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
Any special tips or tricks that I need to know.Wanting to cut one in a Sig Senior (ARF) in order to get to the fire wall to reinforce it and to fuel proof the back side and front of plane.Any suggestions would be helpful!!
#2
Senior Member
Join Date: Jan 2003
Location: Spring Hill,
FL
Posts: 4,734
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
Is it open from the radio compartment? If so try pouring some polyurethane in and swishing it around for about 10 minutes. Plug the holes in the firewall before you start. Then just unplug the holes and drain out the excess.
#5
Senior Member
Join Date: Nov 2002
Location: montgomery, alabama
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
I cut an access panel into the bottom of the fuselage just behind the firewall on my Senior. I think I have some pictures of it in my picture gallery. If not let me know and I will post it.
David
David