starting troubles
07-12-2012, 10:01 PM
#1
Junior Member
Thread Starter
Join Date: Jul 2012
Location: Springfield, OR
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
starting troubles
To whom it may concern,
Hey guys, i havnt ran my savage x 4.6 in almost a year, and ive recently tried to start it. Whats happening is when I plug the exhaust and use the roto start to get gas into the carburater it wont get the fuel moving. when i unplug the fuel line from the carburater plug the exhaust and use the roto start the fuel will flow easily through and out the line. the only way i can even get it to fire is to take out the glow plug, place a few drops of fuel directly onto the piston and quickly put the glow plug back in and try again. Even doing this it wontstart it just fires. Any responce will help. thanks.
-THENAGY13
<br type="_moz" />
Hey guys, i havnt ran my savage x 4.6 in almost a year, and ive recently tried to start it. Whats happening is when I plug the exhaust and use the roto start to get gas into the carburater it wont get the fuel moving. when i unplug the fuel line from the carburater plug the exhaust and use the roto start the fuel will flow easily through and out the line. the only way i can even get it to fire is to take out the glow plug, place a few drops of fuel directly onto the piston and quickly put the glow plug back in and try again. Even doing this it wontstart it just fires. Any responce will help. thanks.
-THENAGY13
<br type="_moz" />
